The aim of this work was to evaluate the stress distribution inside endodontically treated teeth restored with different posts (glass fibre, carbon fibre and steel posts) under different loading conditions by using a 3D-finite element analysis. The effect of masticatory and impact forces on teeth with different degrees of bone loss was analysed. The model consists of: dentine, post, cement, gutta-percha, core and crown. Four simulations were conducted with two static forces (170 N horizontal and 100 N oblique) and two sections constrained: 1 mm (alveolar bone position in a normal periodontium) and 6 mm (middle of root) below the crown. Von Mises and the principal stresses were evaluated and analysed with a 3-way ANOVA and Tukey test (α = 0.05) and the effect of fibre percentage analysed. Significant differences were found among the stress values for all conditions (p < 0.05). Impact load was always responsible for the most critical situation especially when the bone loss was more evident. The system with steel posts showed the highest principal stresses at the post-cement interface with horizontal load and top constraints (compressive stress of 121 MPa and tensile stress of 115 MPa). The use of glass posts provides a more homogeneous behaviour of the system with lower stresses. Higher fibre percentages gave higher stress in the posts. Moreover, larger bone losses are responsible for important increase in stress. Thus, this work demonstrated that periodontal disease has an important role in the success of tooth restoration after endodontic therapy, influencing the choice of post material and depth.
Effect of fibre posts, bone losses and fibre content on the biomechanical behaviour of endodontically treated teeth: 3D-finite element analysis
CHIERUZZI, Manila;PAGANO, STEFANO;CIANETTI, Stefano;LOMBARDO, Guido;KENNY, Jose Maria;TORRE, Luigi
2017
Abstract
The aim of this work was to evaluate the stress distribution inside endodontically treated teeth restored with different posts (glass fibre, carbon fibre and steel posts) under different loading conditions by using a 3D-finite element analysis. The effect of masticatory and impact forces on teeth with different degrees of bone loss was analysed. The model consists of: dentine, post, cement, gutta-percha, core and crown. Four simulations were conducted with two static forces (170 N horizontal and 100 N oblique) and two sections constrained: 1 mm (alveolar bone position in a normal periodontium) and 6 mm (middle of root) below the crown. Von Mises and the principal stresses were evaluated and analysed with a 3-way ANOVA and Tukey test (α = 0.05) and the effect of fibre percentage analysed. Significant differences were found among the stress values for all conditions (p < 0.05). Impact load was always responsible for the most critical situation especially when the bone loss was more evident. The system with steel posts showed the highest principal stresses at the post-cement interface with horizontal load and top constraints (compressive stress of 121 MPa and tensile stress of 115 MPa). The use of glass posts provides a more homogeneous behaviour of the system with lower stresses. Higher fibre percentages gave higher stress in the posts. Moreover, larger bone losses are responsible for important increase in stress. Thus, this work demonstrated that periodontal disease has an important role in the success of tooth restoration after endodontic therapy, influencing the choice of post material and depth.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
