The authors would like to make the following corrections to the published paper [1]. The changes are as follows: (1) Replacing the heading of “Section 2.2.5.” on page 3: “EMPA Analysis” with “EMPA and LA-ICP-MS Analyses” (2) The authors wish to add an explanation along with a reference in “Section 2.2.5.” on page 4. Replacing the original version: The glass pellets obtained after the quenching were embedded with epoxy resin; the mounts were cut, ground, and highly polished down to a 1 µm grade diamond polishing paste. with The glass pellets obtained after the quenching were embedded with epoxy resin; the mounts were cut, ground, and highly polished down to a 1 µm grade diamond polishing paste. Minor and trace elements were analysed at the Department of Physics and Geology (Perugia University) by LA-ICP-MS using the analytical protocol reported in Ref. [25]. Adding a reference into the citation list: 25. Petrelli, M.; Morgavi, D.; Vetere, F.; Perugini, D. Elemental Imaging and Petro-Volcanological Applications of an Improved Laser Ablation Inductively Coupled Quadrupole Plasma Mass Spectrometry. Period. Mineral. 2016, doi:10.2451/2015PM0465. (3) Replacing the caption of Table 4 on page 11: Table 4. Minor elements (ppm), measured with EMPA, in the four samples (2, 3, 4, and 5). with Table 4. Minor elements (ppm) measured with LA-ICP-MS in the four samples (2, 3, 4, and 5).
Correction to: Multi-scale minero-chemical analysis of biomass ashes: A key to evaluating their dangers vs. benefits (Sustainability 2021, 13, 6052)
Comodi P.;Zucchini A.;Cambi C.;Vivani R.;Cavalaglio G.;Cotana F.
2021
Abstract
The authors would like to make the following corrections to the published paper [1]. The changes are as follows: (1) Replacing the heading of “Section 2.2.5.” on page 3: “EMPA Analysis” with “EMPA and LA-ICP-MS Analyses” (2) The authors wish to add an explanation along with a reference in “Section 2.2.5.” on page 4. Replacing the original version: The glass pellets obtained after the quenching were embedded with epoxy resin; the mounts were cut, ground, and highly polished down to a 1 µm grade diamond polishing paste. with The glass pellets obtained after the quenching were embedded with epoxy resin; the mounts were cut, ground, and highly polished down to a 1 µm grade diamond polishing paste. Minor and trace elements were analysed at the Department of Physics and Geology (Perugia University) by LA-ICP-MS using the analytical protocol reported in Ref. [25]. Adding a reference into the citation list: 25. Petrelli, M.; Morgavi, D.; Vetere, F.; Perugini, D. Elemental Imaging and Petro-Volcanological Applications of an Improved Laser Ablation Inductively Coupled Quadrupole Plasma Mass Spectrometry. Period. Mineral. 2016, doi:10.2451/2015PM0465. (3) Replacing the caption of Table 4 on page 11: Table 4. Minor elements (ppm), measured with EMPA, in the four samples (2, 3, 4, and 5). with Table 4. Minor elements (ppm) measured with LA-ICP-MS in the four samples (2, 3, 4, and 5).I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.