RALLINI, MARCO
RALLINI, MARCO
DIPARTIMENTO DI INGEGNERIA CIVILE ED AMBIENTALE
A comparative study between carbon nanotubes and carbon nanofibers as nanoinclusions in self-sensing concrete
2015 D'Alessandro, Antonella; Rallini, Marco; Ubertini, Filippo; Materazzi, Annibale Luigi; Kenny, Jose Maria; Laflamme, Simon
A comparative study on the reactive compatibilization of melt-processed polyamide 1010/polylactide blends by multi-functionalized additives derived from linseed oil and petroleum
2020 Quiles-Carrillo, L.; Fenollar, O.; Balart, R.; Torres-Giner, S.; Rallini, M.; Dominici, F.; Torre, L.
A new concept of flexible thermal protection system for inflatable decelerators
2014 Natali, Maurizio; Rallini, Marco; Kenny, Jose Maria; Torre, Luigi
A Novel Class of Cost Effective and High Performance Composites Based on Terephthalate Salts Reinforced Polyether Ether Ketone
2019 Dominici, Franco; Puglia, Debora; Luzi, Francesca; Sarasini, Fabrizio; Rallini, Marco; Torre, Luigi
Ablation modeling of state of the art EPDM based elastomeric heat shielding materials for solid rocket motors
2016 Natali, Maurizio; Puri, Ivan; Rallini, Marco; Kenny, Jose Maria; Torre, Luigi
Affinamento microstrutturale e miglioramento delle proprietà meccaniche dell’acciaio EUROFER97
2022 Stornelli, G.; Montanari, R.; Varone, A.; Di Schino, A.; Rallini, M.
Affinamento microstrutturale e miglioramento delle proprietà meccaniche dell’acciaio EUROFER97
2022 Stornelli, G.; Di Schino, A.; Montanari, R.; Rallini, M.; Testani, C.; Varone, A.
An Armadillo-Like Flexible Thermal Protection System for Inflatable Decelerators: a novel paradigm
2014 Natali, Maurizio; Rallini, Marco; Puglia, Debora; Kenny, Jose Maria; Torre, Luigi
An Experimental Study on Static and Dynamic Strain Sensitivity of Embeddable Smart Concrete Sensors Doped with Carbon Nanotubes for SHM of Large Structures
2018 Meoni, Andrea; D'Alessandro, Antonella; Downey, Austin; García-Macías, Enrique; Rallini, Marco; Materazzi, A Luigi; Torre, Luigi; Laflamme, Simon; Castro-Triguero, Rafael; Ubertini, Filippo
An Introduction to Ablative Materials and High-Temperature Testing Protocols
2018 Rallini, M.; Natali, M.; Torre, L.
Analysis and simulation of the electrical properties of CNTs/epoxy nanocomposites for high performance composite matrices
2017 Terenzi, Andrea; Natali, Maurizio; Petrucci, Roberto; Rallini, Marco; Peponi, Laura; Beaumont, M; Eletskii, A; Knizhnik, A; Potapkin, B; Kenny, J.
Boron based fillers as char enhancers of EPDM based heat shielding materials for SRMs: A comparative analysis
2018 Rallini, Marco; Puri, Ivan; Torre, Luigi; Natali, Maurizio
CARBON FIBRE/EPOXY COMPOSITES WITH IMPROVEDFIRE RESISTANCE PROPERTIES
2011 Rallini, Marco; Monti, Marco; Natali, Maurizio; Puglia, Debora; Kenny, Jose Maria; Torre, Luigi
Cellulose Nanocrystals and Lignin Nanoparticles Extraction from Lemna minor L.: Acid Hydrolysis of Bleached and Ionic Liquid-Treated Biomass
2024 Puglia, Debora; Luzi, Francesca; Tolisano, Ciro; Rallini, Marco; Priolo, Dario; Brienza, Monica; Costantino, Ferdinando; Torre, Luigi; Del Buono, Daniele
Characterization of Licorice Root Waste for Prospective Use as Filler in more Eco-Friendly Composite Materials
2020 Santulli, Carlo; Rallini, Marco; Puglia, Debora; Gabrielli, Serena; Torre, Luigi; Marcantoni, Enrico
Cover Picture: Macromol. Mater. Eng. 3/2014
2014 Natali, Maurizio; Rallini, Marco; Puglia, Debora; Kenny, Jose Maria; Torre, Luigi
Cure Index for labeling curing potential of epoxy/LDH nanocomposites: A case study on nitrate anion intercalated Ni-Al-LDH
2019 Karami, Z.; Jouyandeh, M.; Ali, J. A.; Ganjali, M. R.; Aghazadeh, M.; Maadani, M.; Rallini, M.; Luzi, F.; Torre, L.; Puglia, D.; Akbari, V.; Saeb, M. R.
Delamination detection in polymeric ablative materials using pulse-compression thermography and air-coupled ultrasound
2019 Laureti, S.; Rizwan, M. K.; Malekmohammadi, H.; Burrascano, P.; Natali, M.; Torre, L.; Rallini, M.; Puri, I.; Hutchins, D.; Ricci, M.
Development and curing potential of epoxy/starch-functionalized graphene oxide nanocomposite coatings
2018 Yarahmadi, Elham; Didehban, Khadijeh; Sari, Morteza Ganjaee; Saeb, Mohammad Reza; Shabanian, Meisam; Aryanasab, Fezzeh; Zarrintaj, Payam; Paran, Seyed Mohammad Reza; Mozafari, Masoud; Rallini, Marco; Puglia, Debora
Development of Mg-Zn-Al-CO3 ternary LDH and its curability in epoxy/amine system
2019 Karami, Z.; Jouyandeh, M.; Ali, J. A.; Ganjali, M. R.; Aghazadeh, M.; Maadani, M.; Rallini, M.; Luzi, F.; Torre, L.; Puglia, D.; Saeb, M. R.
Titolo | Data di pubblicazione | Autore(i) | File |
---|---|---|---|
A comparative study between carbon nanotubes and carbon nanofibers as nanoinclusions in self-sensing concrete | 2015 | D'Alessandro, Antonella; Rallini, Marco; Ubertini, Filippo; Materazzi, Annibale Luigi; Kenny, Jose Maria; Laflamme, Simon | |
A comparative study on the reactive compatibilization of melt-processed polyamide 1010/polylactide blends by multi-functionalized additives derived from linseed oil and petroleum | 2020 | Quiles-Carrillo, L.; Fenollar, O.; Balart, R.; Torres-Giner, S.; Rallini, M.; Dominici, F.; Torre, L. | |
A new concept of flexible thermal protection system for inflatable decelerators | 2014 | Natali, Maurizio; Rallini, Marco; Kenny, Jose Maria; Torre, Luigi | |
A Novel Class of Cost Effective and High Performance Composites Based on Terephthalate Salts Reinforced Polyether Ether Ketone | 2019 | Dominici, Franco; Puglia, Debora; Luzi, Francesca; Sarasini, Fabrizio; Rallini, Marco; Torre, Luigi | |
Ablation modeling of state of the art EPDM based elastomeric heat shielding materials for solid rocket motors | 2016 | Natali, Maurizio; Puri, Ivan; Rallini, Marco; Kenny, Jose Maria; Torre, Luigi | |
Affinamento microstrutturale e miglioramento delle proprietà meccaniche dell’acciaio EUROFER97 | 2022 | Stornelli, G.; Montanari, R.; Varone, A.; Di Schino, A.; Rallini, M. | |
Affinamento microstrutturale e miglioramento delle proprietà meccaniche dell’acciaio EUROFER97 | 2022 | Stornelli, G.; Di Schino, A.; Montanari, R.; Rallini, M.; Testani, C.; Varone, A. | |
An Armadillo-Like Flexible Thermal Protection System for Inflatable Decelerators: a novel paradigm | 2014 | Natali, Maurizio; Rallini, Marco; Puglia, Debora; Kenny, Jose Maria; Torre, Luigi | |
An Experimental Study on Static and Dynamic Strain Sensitivity of Embeddable Smart Concrete Sensors Doped with Carbon Nanotubes for SHM of Large Structures | 2018 | Meoni, Andrea; D'Alessandro, Antonella; Downey, Austin; García-Macías, Enrique; Rallini, Marco; Materazzi, A Luigi; Torre, Luigi; Laflamme, Simon; Castro-Triguero, Rafael; Ubertini, Filippo | |
An Introduction to Ablative Materials and High-Temperature Testing Protocols | 2018 | Rallini, M.; Natali, M.; Torre, L. | |
Analysis and simulation of the electrical properties of CNTs/epoxy nanocomposites for high performance composite matrices | 2017 | Terenzi, Andrea; Natali, Maurizio; Petrucci, Roberto; Rallini, Marco; Peponi, Laura; Beaumont, M; Eletskii, A; Knizhnik, A; Potapkin, B; Kenny, J. | |
Boron based fillers as char enhancers of EPDM based heat shielding materials for SRMs: A comparative analysis | 2018 | Rallini, Marco; Puri, Ivan; Torre, Luigi; Natali, Maurizio | |
CARBON FIBRE/EPOXY COMPOSITES WITH IMPROVEDFIRE RESISTANCE PROPERTIES | 2011 | Rallini, Marco; Monti, Marco; Natali, Maurizio; Puglia, Debora; Kenny, Jose Maria; Torre, Luigi | |
Cellulose Nanocrystals and Lignin Nanoparticles Extraction from Lemna minor L.: Acid Hydrolysis of Bleached and Ionic Liquid-Treated Biomass | 2024 | Puglia, Debora; Luzi, Francesca; Tolisano, Ciro; Rallini, Marco; Priolo, Dario; Brienza, Monica; Costantino, Ferdinando; Torre, Luigi; Del Buono, Daniele | |
Characterization of Licorice Root Waste for Prospective Use as Filler in more Eco-Friendly Composite Materials | 2020 | Santulli, Carlo; Rallini, Marco; Puglia, Debora; Gabrielli, Serena; Torre, Luigi; Marcantoni, Enrico | |
Cover Picture: Macromol. Mater. Eng. 3/2014 | 2014 | Natali, Maurizio; Rallini, Marco; Puglia, Debora; Kenny, Jose Maria; Torre, Luigi | |
Cure Index for labeling curing potential of epoxy/LDH nanocomposites: A case study on nitrate anion intercalated Ni-Al-LDH | 2019 | Karami, Z.; Jouyandeh, M.; Ali, J. A.; Ganjali, M. R.; Aghazadeh, M.; Maadani, M.; Rallini, M.; Luzi, F.; Torre, L.; Puglia, D.; Akbari, V.; Saeb, M. R. | |
Delamination detection in polymeric ablative materials using pulse-compression thermography and air-coupled ultrasound | 2019 | Laureti, S.; Rizwan, M. K.; Malekmohammadi, H.; Burrascano, P.; Natali, M.; Torre, L.; Rallini, M.; Puri, I.; Hutchins, D.; Ricci, M. | |
Development and curing potential of epoxy/starch-functionalized graphene oxide nanocomposite coatings | 2018 | Yarahmadi, Elham; Didehban, Khadijeh; Sari, Morteza Ganjaee; Saeb, Mohammad Reza; Shabanian, Meisam; Aryanasab, Fezzeh; Zarrintaj, Payam; Paran, Seyed Mohammad Reza; Mozafari, Masoud; Rallini, Marco; Puglia, Debora | |
Development of Mg-Zn-Al-CO3 ternary LDH and its curability in epoxy/amine system | 2019 | Karami, Z.; Jouyandeh, M.; Ali, J. A.; Ganjali, M. R.; Aghazadeh, M.; Maadani, M.; Rallini, M.; Luzi, F.; Torre, L.; Puglia, D.; Saeb, M. R. |