In this work we present the development and the application of a new TCAD modelling scheme to simulate the effects of radiation damage on silicon radiation detectors at the very high fluence levels expected at High Luminosity LHC (up to2x10E16 1MeV n/cm2). In particular, we propose a combined approach for the analysis of the surface effects (oxide charge build-up and interface trap states introduction) as well as bulk effects (deep level traps and/or recombination centers introduction). Experimental measurements have been carried out aiming at: i) extraction from simple test structures of relevant parameters to be included within the TCAD model and ii) validation of the new modelling scheme through comparison with measurements of different test structures (e.g. different technologies) before and after irradiation. The good agreements between experimental measurements and simulation findings foster the suitability of the TCAD modelling approach as a predictive tool for investigating the radiation detector behavior at different fluences and operating conditions. This would allow the design and optimization of innovative 3D and planar silicon detectors for future HL-LHC High Energy Physics experiments.
A combined surface and bulk TCAD damage model for the analysis of radiation detectors operating at HL-LHC fluences
MOROZZI, ARIANNA;PASSERI, Daniele;MOSCATELLI, Francesco;
2016
Abstract
In this work we present the development and the application of a new TCAD modelling scheme to simulate the effects of radiation damage on silicon radiation detectors at the very high fluence levels expected at High Luminosity LHC (up to2x10E16 1MeV n/cm2). In particular, we propose a combined approach for the analysis of the surface effects (oxide charge build-up and interface trap states introduction) as well as bulk effects (deep level traps and/or recombination centers introduction). Experimental measurements have been carried out aiming at: i) extraction from simple test structures of relevant parameters to be included within the TCAD model and ii) validation of the new modelling scheme through comparison with measurements of different test structures (e.g. different technologies) before and after irradiation. The good agreements between experimental measurements and simulation findings foster the suitability of the TCAD modelling approach as a predictive tool for investigating the radiation detector behavior at different fluences and operating conditions. This would allow the design and optimization of innovative 3D and planar silicon detectors for future HL-LHC High Energy Physics experiments.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
