Comparative analysis of thermal and non-thermal discharge modes on ultra-lean mixtures in an optically accessible engine equipped with a corona ignition system

Radio-Frequency corona-based ignition systems are currently being investigated by the engine research community for their capability to ensure robust combustion at challenging operating conditions such as lean mixture and/or high exhaust gas recirculation (EGR) dilution. The low-temperature plasma (LTP) produced by the corona discharge accelerates the early flame development thanks to the production of combustion precursors like radical and excited species. Plasma benefits can be maintained with extensive management of the control parameters, preventing the transition from the non-thermal discharge mode to a thermal one.However, under ultra-lean conditions, where the ignition probability significantly decreases, the LTP discharge may not be suitable for promoting the combustion process because of insufficient thermal energy transfer and scarcity of available fuel, which is essential for radical production. Therefore, it may be necessary to increase the volume in which the plasma interacts to ensure robust ignitions and stable flame propagations. For this reason, the present work aims to assess and quantify the differences, in terms of combustion performance, between a corona igniter operating at LTP mode and with electric arcs occurring, at ultra-lean operating conditions. In arc-mode, the igniter produces volumetric discharges, facilitating extensive mixing of the mixture and resulting in advantageous effects on kernel formation and propagation. Tests were carried out in a single-cylinder optical access engine under low load and low speed, using gasoline as fuel. Close to the leanest stable limit found, the LTP mode shows a lower cycle-to-cycle variability. Above such a threshold, the thermal discharge can guarantee stable combustion events while the LTP discharge leads to unstable working conditions. Indicating, imaging, and pollutant emission analysis are carried out to evaluate the effects of thermal and non-thermal plasma modes on combustion characteristics and their environmental impact.(c) 2023 The Author(s). Published by Elsevier Inc. on behalf of The Combustion Institute. This is an open access article under the CC BY license ( http://creativecommons.org/licenses/by/4.0/ )